Our SC-1 Telescope Clamps are designed to fit snugly around your telescope tube and are specifically 3D printed to the exact diameter.

We line the insides of our telescope clamps with felt to ensure that we don't damage your telescope tube.

The SC-1 Telescope Clamp are part of a modular system designed to easily work together with all our mounting plates, and everything fits together using our dedicated connectors.  You can mix and match any of our mounting plates with any of our telescope or tripod clamps. Each telescope comes with the right connectors, specifically designed to work with all our clamps and mounting plates. The connectors do not require any tools, all you need are your fingers, as all our StarClamps System parts are designed to be finger tight. You can remove the Telescope Clamps and all the trays in one piece, so that it makes attaching and removing very quick and easy to do.

We can print up to 228mm / 9" in diameter with no problem, see the pictures below.

Rather than quoting specific prices for our telescope clamps, we group them into sensible size ranges to make it quick and easy to work with, so all you need to do is find the accurate diameter of your telescope tube and look the price up.

We can also adjust the standoff part of the telescope clamp to raise our mounting plates a little higher to clear other parts of the telescope or perhaps other clamping rings. Our normal standoff height is 11mm, so please check that is enough. We can add up to 15mm if necessary. If in doubt just ask.

All of our clamps are printed using high quality PETG, so you can use them in hot weather.

Our normal telescope clamps are Bright Red, Milk White and Black, but if you want different colours, contact us to discuss what you'd like.

What's included

• 1 x SC-1 Telescope Clamp printed to your specification
• 2 x SB-4 connectors to connect any of our mounting plates to the SC-1 telescope clamp.
  

Our clamps are not designed to support the telescope on your dovetail or mounting plate.